CROSS COUNTRY CAPABLE WITH AN ALL-MOUNTAIN MINDSET
The Lynx range incorporates the Split Pivot system that separates and isolates three independent forces of pedaling, braking and suspension.
Obtaining maximum pedaling efficiency with constant and progressive suspension, maintaining traction, maneuverability and rigidity of the bicycle. These characteristics make the Lynx an agile, efficient and balanced bicycle.
LYNX 4.8 ULTRALIGHT TECHNOLOGY
The 4.8 Lynx carbon frames have been built from 100% carbon fiber using HCIM (Hollow Core Internal Molding) construction giving consistency and eliminating excess material due to not having joints between tubes. This process is the same technology used in our high range road frames (G6 Pro and Ultralight)
LYNX 4.8 ALLOY LIGHTWEIGHT AND RIGIDITY
The frame of the new Lynx 4.8 Alloy has been manufactured in triple thickness aluminum alloy 7005-T4 and T6 that guarantees its strength, lighter weight and complete rigidity. The steering tube, the pedal box, the bridge, the cam, the feet are made from cold forged 7075 aluminum and provides for these areas a better weight/resistance ration due to these being the most critical points of the frame.
PRESS FIT 92 MM BB
The width of the Pressfit 92 bottom bracket has allowed BH to widen the downtube and the shock bridge to values that take rigidity to its maximum level and guarantee minimum flex between the front and rear triangles.
REAR WHEEL AXLE 142 x 12 BETTER TRANSMISSION, BETTER STABILITY
The rear axle uses the Q12 - 142 x 12 system, with it increases torsion rigidity by 30% over the 135 x 9 system.
DIRECT MOUNT FULL CARBON FRONT DERAILLEUR
Its development, completely integrated into the frame, guarantees maximum rigidity and precision in gear changes. The rear brake support is Direct Post Mount with false thread to ease its adjustment and reliability.
BH has managed to reduce the length of chainstays to 428 mm resulting in one of the shortest rear ends on the market. This important technological innovation developed by BH allows using tires of up to 2.4 inches and any types of gears (1x, 2x or 3x).
In the Lynx 4.8, all the pivots turn on high quality Enduro Bearings, specifically developed to support large workloads and low bearing speed.
LYNX 4.8 FRAME KIT 27.5 ln4_fr7_us
SpecificationsDownload the online catalog
- frame Lynx 4.8 Carbon
- rear shock Fox Factory Float 3 Position EVOL lever
- headset FSA No.42 1.125-1.5"
- bb set Shimano PF92
- seat clamp BH 34.9 alloy
Select size and colour
0 units w/out stock date