ln6_fr_us LYNX 6 FRAME KIT

negro azul gris
Slide 1

LIGHTWEIGHT EFFICIENT ENDURO PLATFORM

LYNX 6 CARBON ELEGANT AND STYLISH LINES

Crafted from a single sheet of 100% carbon fiber, offering uniformity to the entire frame. The Lynx 6 was developed with HM (High Module T40, T30 and T24 of Toray) technology in order to offer increased rigidity with the same weight.


LYNX 6 ALLOY LIGHTWEIGHT AND RAPID

The frame of the new Lynx 6 Alloy has been manufactured in triple thickness aluminum alloy 7005-T4 and T6 that guarantees its strength, lighter weight and complete rigidity. The steering tube, the pedal box, the bridge, the cam, the feet are made from cold forged 7075 aluminum and provides for these areas a better weight/resistance ration due to these being the most critical points of the frame.


SPLIT PIVOT TECHNOLOGY

Split Pivot is a floating suspension system developed by BH based on traction, pedaling efficiency, handling and the bicycle?s rigidity. This system allows for separate action on three forces produced on the bicycle: pedaling, braking and suspension. The obtained result is maximum pedaling efficiency with consistent and progressive suspension. The advanced rear suspension of the Lynx allows it to have a greater range while being very lightweight.


INTERNAL CABLE GUIDING

The guiding system of cables and derailleurs is completely internal in the Lynx 6 range. It is also equipped with an internal guide in the adjustable seatpost. It incorporates the standard ISCG 05 integrated chain guide.


DIRECT MOUNT DERAILLEUR. EASY ADJUSTMENT, TOTAL PRECISION

The direct anchoring of the Direct Mount derailleur guarantees simple adjustment and maximum degrees of reliability and precision. Being fully integrated in the frame means offers an increased rigidity and an absolute precision when shifting gears. Its design simplifies its adjustment. The anchoring of the Direct Post Mount rear brake, including detachable screws, eases adjustment and reliability.


 
LYNX 6 FRAME KIT ln6_fr_us

LYNX 6 FRAME KIT ln6_fr_us

$2,899.00

Size:
Select your size:
SM MD LA XL
Colour:
Select the color:
negro azul gris
  • frame Lynx 6 Carbon
  • rear shock Fox Factory Float 3 Position EVOL lever
  • headset FSA No.42 1.125-1.5"
  • bb set Shimano PF92
  • seat clamp BH 34.9 alloy

Geometry

  • SM
  • MD
  • LA

TECHNOLOGY

RAPID PEDALING NOBLE DESCENTS

It has perfect balance of agility, rapid response and reaction in complicated descents. Its rear of only 426 mm and its Pressfit 92 bottom bracket situated at a low height are key factors to obtain this objective.

FLOATING LOWER SHOCK MOUNT

Adjustable from the handlebar allowing three positions The position and dimension of the upper cam, guarantee progressive highly sensible and absorbing behavior Enduro Bearings in all pivots are key factors to supporting extreme workloads.

CONCENTRIC TURNING POINT

Its HCIM construction gives consistency and eliminates critical areas due to not having joints between tubes. Developed from HM-T40, T30 and T24 Toray carbon fiber offering increased rigidity with the same weight

ANALYSIS

The simulations carried out by the BH development team have allowed observing and detecting areas of the Lynx where the load is higher and how the frame will respond.

RELATED PRODUCTS

LYNX 6  CARBON SRAM

LYNX 6 CARBON SRAM

$6,999.00

1 color

negro azul gris
  • Fox Factory 36 Float FIT w/HSC/LSC
  • SRAM XO
  • Easton Heist 30

Lynx 6 27.5 Carbon XT

Lynx 6 27.5 Carbon XT

$6,999.00

1 color

negro azul
  • Shimano XT
  • FOX Float 34 CTD FIT Kashima 160 QR15 27.5
  • Fox Float CTD Kashima

LYNX 6 FRAME KIT

LYNX 6 FRAME KIT

$2,899.00

1 color

negro azul gris

+

Newsletter

Copyright © 2015 BH BIKES - All rights Reserved