UlFram_1_US Ultimate 29 Frame

negro rojo
Slide 1

NEW ULTIMATE GENERATION

29? & 27.5"

Developed for the BH Suntour KMC team and the serious biker. It has an aggressive, very lightweight frame, made from high quality carbon fiber.


The BH BIKES R&D team have wanted to provide a new philosophy to the Ultimate 29" frame. The longer top tube, shorter stem and advanced steering angle, provides the cyclist the same virtual position on the bicycle but with a more aggressive sensation and outstanding improvement in descents. The new geometry provides the biker with a greater sensation of trust, stability in the ride especially in technical areas. The rear stays are wider to guarantee maximum rigidity of the frame but with very narrow transversal section also to give maximum lateral rigidity.


New Ultimate 29?

The new Ultimate 290" frame has been developed for the professional cyclist and especially for the BH Suntour KMC team. It has an aggressive frame, very lightweight, and made from high quality carbon. The BH BIKES R&D team have wanted to provide a new philosophy to the Ultimate 29" frame, the longer upper tube, shorter stem and advanced steering angle provides the cyclist the same virtual position on the bicycle but with a more aggressive sensation and outstanding improvement in descents. The new geometrics provide the cyclist with a greater sensation of trust, stability in the ride and in technical areas. The rear stays are wider to guarantee maximum rigidity of the frame but with very narrow transversal section guaranteeing maximum lateral rigidity. It incorporates a 31.6 mm seatpost for lighter weight of the frame and is prepared for incorporating a telescopic seatpost.


HCIM (Hollow Core Internal Molding)

The Ultimate frame has been built incorporating HCIM molding technology applied to high performance road frames. The special disposition of the carbon, the resin and the high pressure applied inside the mold avoid irregular pressures and imperfections and allows building a lighter weight, rigid bicycle with the best global performance. The steering tube and the bearings are made from 100% carbon.


Cable guiding inside the frame SHIMANO D12 INTEGRATED INTO THE VERTICAL TUBE

Just like in the road range, cable guides are used for the interior cabling and this is all well integrated, clean, protected inside the frame, and avoids the use of a sleeve that increases the weight of the frame. The new Shimano D12 system is integrated at the lower part of the vertical tube in the bottom bracket. This new system designed by BH integrates the D12 with a simple clip inside the tube.


REAR WHEEL AXLE 142 x 12 Better transmission, better stability

The rear axle uses the Q12 - 142 x 12 system, which increases torsion rigidity by 30% over the 135 x 9 system.


Press Fit 92 mm bottom bracket

The Press Fit 92 bottom bracket with 92 mm width, manages to increase torsion rigidity, reduce the thickness of the walls, and increase the cross section of the diagonal tubes.


Evo Brake Mount

The stays house the Evo Brake Mount system that is located in the rear stay of the frame and with optimal slope angle to reduce braking vibration.


 
 
Ultimate 29 Frame UlFram_1_US

Ultimate 29 Frame UlFram_1_US

$2,899.00

Size:
Select your size:
SM MD LA XL
Colour:
Select the color:
negro rojo
  • frame BH Ultimate Level High Modulous Carbon w/1.125-1.5" headtube; 142x12mm rear thru axle
  • weight2 2.7lbs

Geometry

  • SM
  • MD
  • LA
  • XL

TECHNOLOGY

R&D

The new Ultimate 29" has a longer reach that its predecessor, a shorter stem and a more advanced steering angle that provides the rider with the same virtual position on the bicycle but with a more aggressive sensation in descents.

HCIM (Hollow Core Internal Molding) CARBON

HCIM (Hollow Core Internal Molding) The Ultimate frame has been built incorporating HCIM molding technology applied to BH Bike high performance road frames.

VERSATILE

The frame has been optimized in its construction to use a single plate. Thanks to an adaptor, a double plate can be mounted and that way obtain a more versatile bike.

PRESS FIT 92 MM

The Press Fit 92 bottom bracket with 92 mm width, manages to increase torsion rigidity, reduce the thickness of the walls, and increase the cross section of the diagonal tubes.

RELATED PRODUCTS

Ultimate 29 Frame

Ultimate 29 Frame

$2,899.00

1 color

negro rojo
  • BH Ultimate Level High Modulous Carbon w/1.125-1.5" headtube; 142x12mm rear thru axle

Ultimate XT 29

Ultimate XT 29

$4,899.00

1 color

negro rojo
  • Shimano XT
  • Fox Float 32 Evolution CTD 100mm

Ultimate XX1 29

Ultimate XX1 29

$7,499.00

1 color

negro rojo
  • SRAM XX1
  • Rock Shox Sid XX WC 29 100mm

+

Newsletter

Copyright © 2015 BH BIKES - All rights Reserved